part number: XRS2LUY11D 3mm two position smd cbi housing oct 10,2016 xdsb0233 v6-z layout: maggie l. p. 1/3 features black casing provides superior contrast reliable & robust custom color combinations available msl (moisture sensitivity level): 3 housing material: ppa housing ul rating : 94v-0 high temperature resistant housing high glass transition temperature epoxy rohs compliant absolute maximum ratings (t a =25c) yellow (gaasp/gap) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 140 ma power dissipation p d 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 package schematics notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. specifications are subjec t to change without notice. yellow (gaasp/gap) unit forward voltage (typ.) (i f =10ma) v f 1.95 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission cie127-2007*(typ.) (i f =10ma) p 590* nm wavelength of dominant emission cie127-2007*(typ.) (i f =10ma) d 588* nm spectral line full width at half-maximum (typ.) (i f =10ma) 35 nm capacitance (typ.) (v f =0v, f=1mhz) c 20 pf operating characteristics (t a =25c) part number emitting color emitting material lens-color wavelength cie127-2007* p nm viewing angle 2 1/2 min. typ. XRS2LUY11D yellow gaasp/gap yell ow diffused 8* 14* 590* 50 luminous intensity cie127-2007* (i f =10ma)mcd *luminous intensity value and wavelength are in accordance with cie127-2007 standards. a relative humidity between 40% and 60% is recommended in esd-protected work areas to reduce static build up during assembly process (reference jedec/jesd625-a and jedec/j-std-033)
part number: XRS2LUY11D 3mm two position smd cbi housing oct 10,2016 xdsb0233 v6-z layout: maggie l. p. 2/3 ? yellow led is recommended for reflow soldering and soldering profile is shown below. yellow
part number: XRS2LUY11D 3mm two position smd cbi housing oct 10,2016 xdsb0233 v6-z layout: maggie l. p. 3/3 ? tape specification (units : mm) ? reel dimension remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
part number: XRS2LUY11D 3mm two position smd cbi housing oct 10,2016 xdsb0233 v6-z layout: maggie l. p. 4/3 packing & label specifications terms of use 1. data presented in this document reflect statistical figures and should be treated as technical reference only. 2. contents within this document are subject to improvement and enhancement changes without notice. 3. the product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet. user accepts full risk and responsibility when operating the product(s) beyond their intended specifications. 4. the product(s) described in this document are intended for electronic applications in which a person?s life is not reliant u pon the led. please consult with a sunled representative for special applications where the led may have a direct impact on a person?s life. 5. the contents within this document may not be altered without prior consent by sunled. 6. additional technical notes are available at http://www.sunledusa.co m/technicalnotes.asp
|
